Make A Wish - DRU

    Hello, and welcome. Today is my last post as part of the Dies R Us team. I  am stepping done since the holiday season is busy for my shop.  I will be sharing with you today a shaker card 

I am sure you are like me and you have rolls of washi tape to last a lifetime. Here is a little tip match the print up and create a pattern paper with it. Adhere this to a card base. My card is 7" x 4" so I did the pattern paper a 1/4" smaller. 

I love these edger dies. All I did was run it through my die cut machine and took a craft knife ad removed the inside to create a frame. Now on the back of the frame, you would want to use a strong double-sided adhesive to attach a piece of plastic, I used an old page protector. After, the plastic is in place cover the inner frame edge with a foam adhesive. Set aside while we create the confetti. 

Now with the mini dies I did multiple cuts of each. This will be part of the confetti filler in the shaker. 

In the center fill the card up with the confetti die cuts and sequins. Since this shaker fills the entire card front I added a lot of filler. 

   Now, remove the foam adhesive backing from the frame and carefully line it up to the card. Press the frame edges down firmly to ensure no confetti of escaping.  Give it a shake and you are now done. 

 Dies R Us Product Used:

Frantic Stamper - Dies - Party Icons Set

Impression Obsession - Dies - Birthday Top Edgers

Don't forget to come to join in the fun at the Dies R Us Challenge Blog.  There's a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  For your convenience, all the important Dies R Us links are provided below.

Click below for:

STORE 
 CHALLENGE BLOG
  FACEBOOK
  INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Thanks for stopping by!

Party Easel Card - DRU

 Welcome back. Today, I have a Dies R Us post. It is a fun easel card. This type of card looks advance but it is super easy to put together. 

   First off you need to die cut the base with a large die, I used one from Spellbinders. Place the folded cardstock within the die so you get a connected shape. You will also need to die cut the same shape again but no need for the fold. I am also using the dies to die cut the pattern papers that will be used to decorate. 

To create the easel fold the front of the card base in half. Then, glue the extra die to the folded half. 

I used the dies from Frantic Stamper to create the embellishments. Monique was die cut twice so her dress was different. To add more personality to her I used markers to color her hair and shoes.  

   Here it is all decorated. I even added layers of dies to the inside of the card. This also helps to keep the card open popularly. 

 Dies R Us Product Used:

Frantic Stamper - Dies - Party Icons Set

Frantic Stamper - Dies - Strolling Monique

Spellbinders

Don't forget to come to join in the fun at the Dies R Us Challenge Blog.  There's a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  For your convenience, all the important Dies R Us links are provided below.

Click below for:

STORE 
 CHALLENGE BLOG
  FACEBOOK
  INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Thanks for stopping by!

Jungle Elephant Card - DRU

 Happy Friday everyone,with a fun jungle card that uses an elephant die and stamp set. First, create your card base, I used brown cardstock and matted it with dark green cardstock. Set aside. To create the die-cut panel first dry emboss it, I used a woodgrain folder. Offset the die on one edge and run it through your machine. 

Now stamp the elephant toward one edge on cardstock and color. 

Now stamp the leaves and die-cut it. I usually have to do this step twice since I always do this step backward. 

Adhere the stamped cardstock, emboss/die cut panel, and add the finishing touches (sentiment, die-cut, and gems). 

 

 Dies R Us Product Used:

Stampendous - Stamp/Die Set - Elephant

Don't forget to come to join in the fun at the Dies R Us Challenge Blog.  There's a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  For your convenience, all the important Dies R Us links are provided below.

Click below for:

STORE 
 CHALLENGE BLOG
  FACEBOOK
  INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Thanks for stopping by!

Pocket Card - Dies R Us

Today's blog post is a fun how-to to create a card with an inside pocket. 

   

I created a little diagram to help visual learners.  Once you got the card base cut and scored place the die on the card front and die cut it. 

  As you can see I used the love word die from Paper Smooches. Keep the die-cut handy since we will be using it in a minute. I wanted to keep this card simple so I just fussy cut a watercolor stamped image and used foam tape to pop it up on to the card. 

   Cover the angle piece with your desired paper. Now fold the card so the angle cut is on the inside of the card. Glue along the inner and bottom edges. With the card close glue the love die-cut on the inside of the card by placing it in the negative area of the card front. Accent the sentiment with a Funky Floral #3 die-cut. 

   For the finishing inside touch, I added the same Funky Floral #3. With this inside pocket, it is great to hold a gift card. 

  Here is the completed card. 

 Dies R Us Product Used:

Sizzix Tim Holtz Funky Floral #3

Paper Smooches Love word 

Don't forget to come to join in the fun at the Dies R Us Challenge Blog.  There's a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  For your convenience, all the important Dies R Us links are provided below.

Click below for:

STORE 
 CHALLENGE BLOG
  FACEBOOK
  INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Thanks for stopping by!

Christmas Table

   Hello everyone, today I will be sharing Christmas project since it is Christmas in July. Today I will be sharing how-to create simple place setting cards.

   Step 1. Fold cardstock in half. Tape the die the cardstock making sure the top of the die overhang the fold. Run it through the die cutter, this will create the card base. 

    Step 2. Die-cut next smaller size in the nesting die set.  Also, at this time die cut the Sizzix Tim Holtz Funky Floral #3  flower. For the flower center, I used a sequin. Adhere everything to the place card. 

 Step 3. Type names on cardstock, trim strips, and tuck it under the flower. To make the cards stand up straight just trim off the bottom to create a flat edge. 

Dies R Us Product Used:

Sizzix Tim Holtz Funky Floral #3

 

Spellbinders Layered Labels 

Don't forget to come to join in the fun at the Dies R Us Challenge Blog.  There's a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  For your convenience, all the important Dies R Us links are provided below.

Click below for:

STORE 
 CHALLENGE BLOG
  FACEBOOK
  INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Thanks for stopping by!

How To- Spinner Card

 Today's card that I will be sharing with you is a spinner card. This type of card is perfect to showcase a die-cut. 

   The first thing I did was use temporary adhesive to hold the cardstock onto the card base. Tape the die in place and run it through your machine. You might have to add a shim to the die-cut plate sandwich to be able to cut through both layers. Remove the paper from the card base. 

  

 Die-cut the layered Jeanine's Art Classic Butterflies twice but make sure to die cut the image once on with the right side of the paper facing up and once when it is facing down. This ensures the when glueing the die cuts backs together that it lines up perfectly. 

   Now glue a piece of string to the center of the card base. Adhere to the die-cut pattern paper to the base, making sure to match the negative die-cut space. 

  

 Last, this is to add the die-cut. Once it has dried spin the die-cuts around a few times. While holding the wound up die-cut close the card and slide it into the envelope. When the card is removed from the envelope and open the die-cut will spin. 

Here is a little video of the card spinning and how to prepare it for the envelope. 

Dies R Us Product Used:

 Jeanine's Art Classic Butterflies 

Spellbinders Layered Flower 

Don't forget to come to join in the fun at the Dies R Us Challenge Blog.  There's a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  For your convenience, all the important Dies R Us links are provided below.

Click below for:

STORE 
 CHALLENGE BLOG
  FACEBOOK
  INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Thanks for stopping by!